Bài giảng Tín hiệu và hệ thống - Chương 4: Fourier transform representation of signal
Ch-4: Fourier transform representation of signal
P4.1. Use the Fourier transform analysis equation to calculate the
Fourier transform of the following signals:
b) f(t)=e−2|t−1|
a) f(t)=e−2(t−1)u(t −1)
d
d) f(t)= [u(-2-t)+u(t-2)]
c) f(t)=δ(t +1) + δ(t −1)
dt
Sketch and label the magnitude of each Fourier transform.
P4.2. Determine the Fourier transform of each of the following
periodic signals:
b) f(t)=1+cos(6πt+ π8 )
a) f(t)=sin(2πt+ π4 )
P4.3. Use the Fourier transform synthesis equation to determine the
inverse Fourier transform of:
a) F(ω)=2πδ(ω)+πδ(ω− 4π)+πδ(ω+4π)
b) F(ω)=2rect( ω−1 ) − 2rect( ω+1
)
2
2
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.4. Given that f(t) has the Fourier transform F(ω), express the
Fourier transform of the signals listed below in terms of F(ω). You
may use the Fourier transform properties.
a) f1(t)=f(1− t)+f( −1− t)
b) f2 (t)=f(3t − 6)
2
c) f3 (t)= d f(t −1)
dt2
P4.5. For each of the following Fourier transforms, use Fourier
properties to determine whether the corresponding time-domain signal
is (i) real, imaginary, or neither and (ii) even, odd, or neither. Do this
without evaluating the inverse of any of the given transform.
a) F (ω)=rect( ω−1 ) b) F (ω)=cos(2ω)sin( ω )
1
2
2
2
b) F (ω)=A(ω)ejB(ω); where A(ω)=(sin2ω)/ω, B(ω)=2ω+ π2
3
∞
c) F (ω)=
|n| δ(ω− n π4 )
1
( 2 )
∑
4
n=−∞
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
1
Ch-4: Fourier transform representation of signal
P4.8. Determine the Fourier transform of the following signal:
f(t)= π2t sin2t
1
Use the Parseval’s relation and the result of the previous part to
determine the numerical value of Ef
g(t)=f(3t)∗h(3t)
,
P4.9. Given the relationships
and
y(t)=f(t)∗h(t)
and given that f(t) has Fourier transform F(ω) and h(t) has Fourier
transform H(ω), use the Fourier transform properties to show that
g(t) has the form g(t)=Ay(Bt). Determine the values of A and B
P4.10. Consider the Fourier transform pair: e−|t| ↔ 2/(1+ ω2 )
a) Determine the Fourier transform of te-|t|
4t /(1+ t2 )2
b) Determine the Fourier transform of
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.6. Determine the Fourier transform of the signal depicted in
Figure P4.6
P4.7. Determine the Fourier transform of the signal depicted in
Figure P4.7
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
2
Ch-4: Fourier transform representation of signal
+∞
nπ
f(t)=
sinc
δ (t − nπ )
P4.11. Consider the signal
(
)
4 4
∑
n=−∞
sint
f(t)=
g(t)
a) Determine g(t) such that
πt
b) Use the multiplication property of the Fourier transform to argue
that F(ω) is periodic. Specify F(ω) over one period.
P4.12. Determine the continuous-time signal corresponding to each
of the following transform.
a) F(ω)=2sin[3(ω − 2π)]/(ω − 2π)
b) F(ω)=cos(4ω+π/3)
c) F(ω)=2[δ (ω −1) −δ (ω+1)]+3[δ (ω − 2π) −δ (ω+2π)]
d) F(ω) as given by the magnitude and phase plots of Figure P4.12a
e) F(ω) as in Figure P4.12b
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.13. Let F(ω) denote the Fourier transform of the signal f(t)
depicted in Figure P4.13.
+∞
c) Find
F(ω)dω
a) Find ∠F(ω) b) Find F(0)
∫
−∞
+∞
+∞
2sinω
ej2ωdω
e) Evaluate
|F(ω)|2dω
d) Evaluate
F(ω)
∫
∫
−∞
−∞
ω
f) Sketch the inverse Fourier transform of Re{F(ω)}
Note: you should perform all these calculations without explicitly
evaluating F(ω)
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
3
Ch-4: Fourier transform representation of signal
P4.14. Find the impulse response of a system with the frequency
response
(sin2 (3ω))cosω
H(ω)=
ω2
P4.15. Consider a causal LTI system with frequency response
H(ω)=1/(3+jω). For a particular input f(t) this system is observed
y(t)=e−3tu(t) −e−4t u(t). Determine f(t).
to produce the ouput
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.16. Consider an LTI system S with impulse response
sin[4(t −1)]
h(t)=
π(t −1)
Determine the output of this system for each of the following
+∞
a) f(t)=cos(6t+ π2 )
1
inputs:
b) f(t)=
n sin(3nt)
( 2 )
∑
n=0
2
sin[4(t +1)]
π(t+1)
sin2t
c) f(t)=
d) f(t)=
πt
P4.17. The input and the output of a causal LTI system are related
2
(D + 6D+8)y(t)=2f(t)
by the differential equaton
a) Find the impulse response of this system.
b) What is the response of this system if f(t)=te-2tu(t)?
c) Repeat part a) for the causal LTI system described by the
(D2 + 2D+1)y(t)=(2D − 2)f(t)
equation
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
4
Ch-4: Fourier transform representation of signal
P4.18. Shown in Figure P4.18 is the frequency response H(ω) of a
continuous-time filter referred to as a low-pass differentiator. For
each of the input signals f(t) below, determine the filtered output
signal y(t).
a) f(t)=cos(2πt+θ)
b) f(t)=cos(4πt+θ)
c) f(t)=|sin(2πt)|
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.19. Shown in Figure P4.19 is |H(ω)| for a low-pass filter.
Determine and sketch the impulse response of the filter for each of
the following phase characteristics:
a) ∠H(ω)=0
b) ∠H(ω)=ωT,where T is a constant
π/2 ω>0
c) ∠H(ω)=
-π/2 ω<0
P4.20. Consider an ideal high-pass filter whose frequency response
is specified as:
1 |ω|>ω
c
H(ω)=
0 otherwise
a) Determine the impulse response h(t) for this filter
b) As ωc is increased, does h(t) get more or less concentrated about
the origin?
c) Determine s(0)& s(∞), where s(t) is the step response of the filter
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
5
Ch-4: Fourier transform representation of signal
P4.21. Figure P4.21 shows a system commonly used to obtain a
high-pass filter from a low-pass filter and vice versa
a) Show that, if H(ω) is a low-pass filter with cutoff frequency ωLP,
the overall system corresponds to an ideal high-pass filter.
Determine the system’s cutoff frequency and sketch its impulse
response.
b) Show that, if H(ω) is a high-pass filter with cutoff frequency
ωHP, the overall system corresponds to an ideal low-pass filter.
Determine the system’s cutoff frequency and sketch its impulse
response.
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.22. Let f(t) be a real-valued signal for which F(ω)=0 when
|ω|>2000π. Amplitude modulation is perform to produce the signal
g(t)=f(t)sin(2000πt). A proposed demodulation technique is
illustrated in Figure P4.22 where g(t) is the input, y(t) is the output,
and the ideal lowpass filter has cutoff frequency 2000π and
passband gain of 2. Determine y(t).
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
6
Ch-4: Fourier transform representation of signal
P4.23. Suppose f(t)=sin200πt+2sin400πt and g(t)=f(t)sin400πt. If
the product g(t)sin400πt is passed through an ideal low-pass filter
with cutoff frequency 400π and pass-band gain of 2, determine the
signal obtained at the output of the low-pass filter.
P4.24. Suppose we wish to transmit the signal
sin1000πt
f(t)=
πt
using a modulator that creates the signal
w(t)=[f(t)+A]cos(10000πt)
Determine the largest permissible value of the modulation index m
that would allow asynchronous demodulation to be use to recover
f(t) from w(t). For this problem, you should assume that the
maximum magnitude taken on by a side lobe of a sinc function
occurs at the instant of time that is exactly halfway between the two
zero-crossings enclosing the side lobe.
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.25. An AM-SSB/SC system is applied to a signal f(t) whose
Fourier transform F(ω) is zero for |ω|>ωM. the carrier frequency ωc
used in the system is greater than ωM. Let g(t) denote the output of
the system, assuming that only the upper sidebands are retained.
Let q(t) denote the output of the system, assuming that only the
lower sidebands are retained. The system in Figure P4.25 is
proposed for converting g(t) into q(t). How should the parameter ω0
in the figure be related to ωc? What should be the value of pass-
band gain A
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
7
Ch-4: Fourier transform representation of signal
P4.26. In Figure P4.26, a system is shown with input signal f(t) and
output signal y(t). The input signal has the Fourier transform
F(ω)=∆(ω/4ω0). Determine and sketch Y(ω), the spectrum of y(t)
ω − 4ω0
2ω0
ω + 4ω
2ω0
0
Assume
H1(ω)=rect
+ rect
ω
and
H2 (ω)=rect
6ω0
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.27. A commonly used system to maintain privacy in voice
communication is a speech scrambler. As illustrated in Figure
P4.27(a), the input to the system is a normal speech signal f(t) and
the output is the scrambler version y(t). The signal y(t) is
transmitted and then un-scrambler at the receiver.
We assume that all inputs to the scrambler are real and band limited
to the frequency ω0; that is F(ω)=0 for |ω|>ω0. Given any such
input, our proposed scrambler permutes different bands of the
spectrum of the input signal. In addition, the output signal is real
and band limited to the same frequency band; that is Y(ω)=0 for
|ω|>ω0. The specific algorithm for the scrambler is
X ω − ω ; ω>0
0
Y(ω)=
X ω + ω ; ω<0
(
)
0
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
8
Ch-4: Fourier transform representation of signal
a) If F(ω) is given by the spectrum shown in Figure P4.27(b),
sketch the spectrum of the scrambled signal y(t).
b) Using amplifiers, multipliers, adders, oscillators, and whatever
ideal filters you find necessary, draw the block diagram for such
an ideal scrambler.
c) Again using amplifiers, multipliers, adders, oscillators, and ideal
filters, draw a block diagram for the associated unscrambler.
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
Ch-4: Fourier transform representation of signal
P4.28. Figure P4.28(a) the system that to perform single-sideband
modulation. With F(ω) illustrated in Figure P4.28(b), sketch Y1(ω),
Y2(ω), and Y(ω) for the system in Figure P4.28(a), and
demonstrate that only the upper-sidebands are retained
Signal & Systems - FEEE, HCMUT – Semester: 02/10-11
9
9 trang
29/04/2022
6520
Bạn đang xem tài liệu "Bài giảng Tín hiệu và hệ thống - Chương 4: Fourier transform representation of signal", để tải tài liệu gốc về máy hãy click vào nút Download ở trên
File đính kèm:
- bai_giang_tin_hieu_va_he_thong_chuong_4_fourier_transform_re.pdf
